Ron Brewer

Conference Activities - A Partial Listing


         Technical Session Chairman at 2004 IEEE EMC Symposium on: EMC Power Line and Communications Filters

         Workshop instructor at Southcon/2004 on: PCB EMC Design Practices and on Grounding/Bonding/Shielding

         Speaker at Microchip/2002 on: EMC Systems Design for Digital Devices

         Workshop instructor at International Appliance Conference/2002 on: Enhancing Cabinet Shielding to Meet EMC Requirements;

         Workshop instructor at Southcon/2002 on: Systems Level EMC Design Practices;

         Guest Speaker at SME/2001 meeting on: Design Fundamentals for EMC/ESD Control

         Workshop instructor at WESCON/2001 on: Systems Level EMC Design Practices and on EMC Design for HS PC Boards

         Workshop instructor at Northcon/2001 on: Understanding PCB EMC Design Practices

         Demonstration leader at 2001 IEEE EMC Symposium on: Electro Static Discharge (ESD);

         Guest speaker at San Diego IEEE EMC Chapter Meeting on: EMC Design of Portable Devices

         Guest speaker at EMC Japan 2001 on: EMC Design of Portable and Handheld Devices

         Workshop instructor at International Appliance Conference 2001 on: Low Cost EMC Design for Appliances

         Workshop instructor at EtroniX/Wescon 2001 on: EMC Design Practices for PCBs and on Designing High Performance Shields

         Speaker at ARRL Tennessee State Conference/2001 on: RF Radiation Hazards/Complying with FCC OET 65

         Workshop instructor at EMC Asia 2000 on: EMC Systems Design for High Speed Digital Devices.

         Workshop instructor at Northcon/2000 on: Systems Level EMC Design Practices

         Workshop instructor at Wescon/2000 on: Systems Level EMC Design Practices and on EMC Design for Mechanical Packaging

         Workshop instructor at Southcon/2000 on: PCB & Systems Level EMC Design Practices

         Speaker at DixieFest 2000 on: Minimizing RF Radiation Hazards

         Workshop instructor at EMC Asia 99 on: EMC Systems Design for Digital Devices

         Workshop instructor at York EMC 99 on: EMC Systems Design

         Workshop instructor at Southcon/99 on: Signal Integrity: Intra-systems EMC Design

         Speaker at 1999 IMAPS 500MHz UHS Processing Symposium on: Shielding, The Hole Problem

         Speaker at WESCON/98 on: EMC Practices: Radiated Emission and EMC in Printed Circuit Boards

         Speaker at the 1998 Optical Network Interface Design Symposium (ONIDS) on: Shielding/Suppression of Radiated Emissions for E/O Transceivers

         Speaker at 1998 Japan National EMC Conference on: High Performance Shielded Enclosure Design

         Speaker at ARRL Arizona National Convention/1997 on: EMI/RFI/EMC in Radio Communication Systems

         Workshop instructor at Southcon/97 on: PCB EMC Design Practices

         Workshop instructor at IPC Printed Circuits Expo 96 on: PCB EMC Practices

         Speaker at Arizona State Hamfest1996 on: EMI/RFI/EMC in Radio Communication Systems

         Workshop instructor at the IEEE 1996 International EMC Symposium on: EMC in Cables and Connectors

         Keynote Speaker at the 1996 Australian/NZ National EMC Conference on the: USA Telecommunications Act of 1996 and Workshop instructor on: Shielding to Meet EMC Requirements.

         Guest Speaker at the WESCON/95 Business Conference on: Worldwide Impact of the New European EMC Standards

         Workshop instructor at Northcon/95 on: Designing to Meet the European EMC Directive.

         Speaker at the 1995 NEMKO EMC/ESD Conference on: Systems and PCB Design for EMC

         Workshop instructor at the IEEE 1995 International EMC Symposium on: EMC Systems Design

         Workshop instructor at IPC Printed Circuits Expo 95 on: EMC Practices in Printed Circuit Board Design

         Speaker at the Scandinavian EMC Conference Oslo 93 on: EMC Design of High Speed Logic Based Systems

         Speaker at Singapore SISIR 92 on: Shielding Design

         Speaker at SYSCOM 92 on: EMC Design of Computer Systems

         Technical Session Chairman at EMC Expo 90 on: New EMC Products

         Technical Session Chairman at EMC Expo 89 on: EMC Testing of Electronic Systems

         Technical Session Chairman at EMC Expo 87 on: Military EMC Requirements and Design

         Speaker at EMC Expo 86 & 87 on: MIL-STD-461/462 EMC Requirements and Measurement

         Technical Session Chairman at EMC Expo 86 on: Military EMC Requirements and Design

         Guest Speaker at the 1984 Japan National EMC Conference on: Shielding to meet FCC EMC Requirements

         Visiting instructor for the 1981 SHAPE Training Program on: MIL-STD-461A

         Invited panelist at the 1977 National Communications Conference on: EMC Considerations for Communications Equipment


Return to Resume page

www.ronbrewer.com